Black Box ACS120 Uživatelská příručka stáhnout pdf (Strana 425)

100

101

Appendix J - Examples for Config Testing

User Guide 425

Step 2: Confirm that the Radius server is reachable.

From the console, ping 200.200.200.2 to make sure the Radius authentication server

is reachable.

Step 3: Confirm physical connections.

Make sure that the physical connection between the BLACK BOX ® Advanced

Console Server and the modems is correct. The modem cable provided with the

product should be used. Please see Appendix B - Cabling, Hardware, and Electrical

Specifications for pinout diagrams.

Step 4: Confirm modem settings.

The BLACK BOX ® Advanced Console Serverhas been set for communication at

57600 bps, 8N1. The modems should be programmed to operate at the same speed

on the DTE interface.

Step 5: Confirm routing.

Also make sure that the computer is configured to route console data to the serial

console port.

Step 6: Perform a test dial-in.

Try to dial in to the BLACK BOX ® Advanced Console Server from a remote

computer using the username and password configured in step one. The computer

dialing in must be configured to receive its IP address from the remote access server

(the BLACK BOX ® Advanced Console Server in this case) and to use PAP

authentication.

Step 7: Activate changes.

Now continue on to Task 5: Activate the changes

through Task 8: Reboot the BLACK

BOX ® Advanced Console Server listed in Chapter 2 - Installation, Configuration, and

Usage.

1 2 ... 420 421 422 423 424 425 426 427 428 429 430 ... 449 450

Komentáře k této Příručce

Žádné komentáře

Black Box ACS120 Uživatelská příručka Strana 425

Komentáře k této Příručce