Black Box ACS120 Uživatelská příručka stáhnout pdf (Strana 198)

100

101

PCMCIA

198 BLACK BOX ® Advanced Console Server

cardclt eject 1 for the upper slot

PCMCIA Network Configuration

The onboard Ethernet device has the eth0 name. The first PCMCIA Ethernet card or wireless

LAN card detected will receive the eth1 name, the second card will be eth2.

cardmgr will read the network settings from the /etc/network/interfaces and assign an IP to

eth1.

The factory default /etc/network/interfaces has the following lines:

# auto eth1

# iface eth1 inet static

# address 192.168.0.42

# network 192.168.0.0

# netmask 255.255.255.0

# broadcast 192.168.0.255

# gateway 192.168.0.1

Note: Due to a known problem in the current release, the I/O ports used by

the card cannot be re-used after card re-insertion. In each card insertion, the

card gets a different I/O port. This limits the number of times the card can be

ejected and inserted. When all the I/O ports known by the card are used, the

RequestIO: No more items message is displayed, and the only way to reset the

I/O port usage is to reboot the system.

Note: Before changing the /etc/network/interfaces file, unload the

network client driver using cardctl eject.

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 449 450

Komentáře k této Příručce

Žádné komentáře

Black Box ACS120 Uživatelská příručka Strana 198

Komentáře k této Příručce