Black Box IC108A Instalační příručka stáhnout pdf (Strana 15)

Hardware Installation Guide

revision 1 — 157

10. The software will next ask you if you wish to set the gateway. Answer yes and type the gateway IP

address just as you did for the IP address of the device. As it did for the device’s IP address, the current

configuration information will display at each segment of the IP address.

11. You now need to enter a subnet mask. You CANNOT enter a number here as you are used to, you must

use the following table to determine what to type into this field.

12. You will be prompted to change the Telnet configuration password. Answer Yes to the prompt.

13. Enter SYST for the password when prompted.

14. When asked to use a token-ring administered address answer NO.

15. You will now be at the setup screen. Make sure the information displayed at the top matched the

information you just typed into the unit.

255.255.255.252 =02 255.255.252.0 =10 255.252.0.0 =18

255.255.255.248 =03 255.255.248.0 =11 255.248.0.0 =19

255.255.255.240 =04 255.255.240.0 =12 255.240.0.0 =20

255.255.255.224 =05 255.255.224.0 =13 255.224.0.0 =21

255.255.255.192 =06 255.255.192.0 =14 255.192.0.0 =22

255.255.255.128 =07 255.255.128.0 =15 255.128.0.0 =23

255.255.255.0 =08 255.255.0.0 =16 255.0.0.0 =24

255.255.254.0 =09 255.254.0.0 =17

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 34 35

Žádné komentáře

Black Box IC108A Instalační příručka Strana 15